LS-2000 / LS-2000c Linear Diode Array
The Jarrell-Ash LS-200 and LS-2000c multichannel optical analyzers offer a breakthrough in spectroscopic instrumentation: powerful tools that are flexible and affordable. Accurate real-time detection and analysis is practical for a wide variety of analytical methods, including spectroscopy, Raman scattering, fluorescence, HPLC, color measurement, and others. The 2048-element photodiode array detector system provides broad spectral response (200 to 1100 nm), high quantum efficiency, fast scanning rate, low dark noise current, low readout noise, and 12-bit A/D digitizing resolution. Two models are available for your specific applications: the ambient model LS-2000 and the thermoelectrically cooled LS-2000c.
ST-6
CCD Detector System
The ST-6 UV CCD camera from Santa Barbara Instruments Group is an excellent low cost CCD detector system. With a two-stage TE cooled 750 x 242 pixel array covering an 8.63 x 6.53 mm area, the ST-6 covers a spectral response range from 200 nm to 1100 nm. Exposure times are fully programmable down to 0.01 seconds, and the signal is clocked in using a 16-bit digitization. The KestrelSpec software, available for wither the Mac or Windows, is a powerful yet easy to use analysis tool designed specifically for spectroscopic applications.
PMT Power Supply
The PMT-HVPS was designed to provide researchers with a user-friendly, high-quality power source capable of meeting the most demanding performance standards. This portable unit has a line regulation of 0.01 percent and an anode ripple voltage of less than 5 mV peak-to-peak. Its output is adjustable and ranges from 0 to -1,000 volts. The PMT-HVPS also demonstrates outstanding stability at 0.01 percent/hour. If your research with photomultiplier tubes demands the best equipment, choose the PMT-HVPS as your power source.
|
Coax
Wire
|
Output
Signal
|
|
Red
|
15
V
|
|
Brown
|
Ground
|
|
Orange
|
Vcon-in
|
|
Yellow
|
Case
ground
|
|
Specifications
|
|
|
Input
voltage:
|
15
V ± 1 V
|
|
Input
current:
|
200mA
TYP
|
|
Output
voltage:
|
0
to -1,000 V
|
|
Anode
current:
|
30µA
Max.
|
|
Dynode
chain:
|
330K
ohms X 10 steps
|
|
Anode
ripple:
|
5
mVpp (Cathode Volt @ 1KV)
|
|
Output
control voltage:
|
Vcon-in
0 to 5 V
|
|
Line
regulation:
|
0.01
percent
|
|
Stability:
|
0.01
percent/hour
|
|
Shielding:
|
Metal
case
|
|
Operation
temperature:
|
0
to 50° C
|
|
Storage
temperature:
|
-20
to 60° C
|
|
Input
terminals (lead ends not stripped):
|
Flying
leads (132cm)
|
|
Output
terminals:
|
Socket
1 1/8 in.
|
|
Output
signal:
|
50
ohms shielded wire (101cm)
|
|
Size:
|
35Ø
x 53L mm
|
The above specifications indicate maximum rated output and may change without prior notice.
Aladdin
HCL Power Supply
AWESOME POWER, itty-bitty package. Presenting the Aladdin Hollow Cathode Lamp Power Supply from Jarrell-Ash. Now a trusted name in hollow cathode lamps brings you a way to bring the genie out of your lamps, without smokin' your budget. Finally, an inexpensive HCL power supply that won't take up your valuable lab space. The Aladdin HCL Power Supply provides the power to light any element lamp, including deuterium. Best of all, it comes in a package so small you can carry it in a brief case. The Aladdin HCL Power Supply from Jarrell-Ash. You may not get three wishes, but with any other power supply, you'll wish you had one of these.
|
Specifications
|
|
|
Starting
Voltage:
|
500
Volts
|
|
Output
Current:
|
0
- 20 mA DC
|
|
Current
Ripple:
|
0.01%
p-p
|
|
Voltage
Ripple:
|
20
mV p-p
|
|
Electronic
Drift:
|
<0.5%
|
|
Input
Voltage:
|
84-270
VAC (universal)
|
|
Input
Current:
|
1
Amp
|
|
Lamp
Fuse:
|
50
mA fast blow micro-mini
|
|
Supply
Fuse:
|
1
Amp fast blow 1.25" 250V
|
|
Display:
|
Digital
LCD Panel Meter
|
|
Adjustment:
|
10
turn, 0 - 20 mA
|
|
Socket:
|
8-pin
Standard HCL, P-E adapter available
|
|
Dimensions:
|
6
x 4 x 7 (WHD) inches
|
|
Weight:
|
2.5
lbs.
|
Pen
Style Calibration Lamp
This low cost pen style calibration lamp is the perfect tool for applications like instrument calibration or line profiling. It comes with either a mercury, neon, or argon pen lamp so you can choose the lamp which is best for your application. Available for 110 or 220 volt line sources, this compact light source is a must for your research facility.
